Filter
Top Products
Extensible Firmware Interface Specification
E-28 12/01/02 Version 1.10
// If set, broadcast packets will be received.
#define PXE_STATFLAGS_RECEIVE_FILTER_BROADCAST 0x0002
// If set, multicast packets that match up with the multicast
// address filter list will be received.
#define PXE_STATFLAGS_RECEIVE_FILTER_FILTERED_MULTICAST 0x0004
// If set, all packets will be received.
#define PXE_STATFLAGS_RECEIVE_FILTER_PROMISCUOUS 0x0008
// If set, all multicast packets will be received.
#define PXE_STATFLAGS_RECEIVE_FILTER_ALL_MULTICAST 0x0010
//*******************************************************
// UNDI Station Address
//*******************************************************
// No additional StatFlags
//*******************************************************
// UNDI Statistics
//*******************************************************
// No additional StatFlags
//*******************************************************
// UNDI MCast IP to MAC
//*******************************************************
// No additional StatFlags
//*******************************************************
// UNDI NvData
//*******************************************************
// No additional StatFlags
//*******************************************************
// UNDI Get Status
//*******************************************************
// Use to determine if an interrupt has occurred.
#define PXE_STATFLAGS_GET_STATUS_INTERRUPT_MASK 0x000F
#define PXE_STATFLAGS_GET_STATUS_NO_INTERRUPTS 0x0000