Filter
Top Products
100 Intel Blade Server Switch Module SBCEFCSW Management and User’s Guide
Switch Data window
The Switch Data window displays current network and switch module information for the selected switches.
For more information about the Switch data window, see “Configuring a switch module” on page 105. To open
the Switch Data window, select one or more switch modules in the Topology window and click the Switch tab
below the window. You can also open the Switch Data window from the Faceplate window.
Table 19. Name server data window entries
Entry Description
Device Device number in the fabric
Switch Switch module name
Port Port number: Ext1:0, Ext2:15
Address Fibre Channel address
Type Node type
NWWN Node worldwide name
PWWN Port worldwide name
Vendor Host bus adapter and device vendor
FC-4 types Device Fibre Channel protocol types
Active zones Zones in the current active zone set that contains the device
Table 20. Switch data window entries
Entry Description
FcAddress Switch module Fibre Channel address
World Wide name Switch module worldwide name
Reason for status Additional status information
User name Name of user
Login level Security level
Security enabled Fabric security on the switch module that enforces account names and
passwords
Vendor Switch module manufacturer
Flash version Active flash
Inactive flash version Inactive firmware version
PROM/Flasher version Firmware version
MAC address Media access control address
IP address Internet protocol address
Subnet mask Mask that determines the IP address subnet
Gateway Gateway address
Negotiated domain ID The domain ID currently in use by the fabric