Intel SBCEFCSW Switch User Manual


 
57
The following is an example of the Show Setup Snmp command.
FCSM: user1> show setup snmp
SNMP Information
----------------
Contact <sysContact undefined>
Location <sysLocation undefined>
Description Fibre Channel Switch Module
Trap1Address 10.0.0.254
Trap1Port 162
Trap1Severity warning
Trap1Enabled False
Trap2Address 0.0.0.0
Trap2Port 162
Trap2Severity warning
Trap2Enabled False
Trap3Address 0.0.0.0
Trap3Port 162
Trap3Severity warning
Trap3Enabled False
Trap4Address 0.0.0.0
Trap4Port 162
Trap4Severity warning
Trap4Enabled False
Trap5Address 0.0.0.0
Trap5Port 162
Trap5Severity warning
Trap5Enabled False
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.16
AuthFailureTrap False
The following is an example of the Show Setup System command.
FCSM: user1> show setup system
System Information
------------------
Eth0NetworkAddress 10.20.8.188
Eth0NetworkMask 255.255.252.0
Eth0GatewayAddress 10.20.8.254
Eth0NetworkDiscovery Static
AdminTimeout 30
SecurityEnabled False
LocalLogEnabled True
RemoteLogEnabled False
RemoteLogHostAddress 10.0.0.254