Filter
Top Products
11
Config command
Manages the Fibre Channel configurations on a switch. For information about setting the port and switch
configurations, see the “Set Config command” on page 29.
Authority
Admin for all keywords except List
Syntax
config
activate [config]
backup
cancel
copy [config_source] [config_destination]
del
ete [config]
edit [config]
list
restore
save [config]
Keywords
activate [config]
Activates the configuration given by [config]. If the configuration is omitted, the currently active
configuration is used. Only one configuration can be active at a time.
backup
Creates a file named configdata, which contains the configuration information. To download this
file, open a File Transfer Protocol (FTP) session, log in with account name of images and password
of images, and type get configdata.
cancel
Terminates the current configuration edit session without saving changes.
copy [config_source] [config_destination]
Copies the configuration given by [config_source] to the configuration given by [config_destination].
The switch supports up to 10 configurations, including the default configuration.
delete [config]
Deletes the specified configuration file where [config] is the file name.
edit [config]
Opens an edit session for the configuration given by [config]. If the configuration name is omitted,
the currently active configuration is used.
list
Displays a list of all available configurations. This keyword is available with User authority.
restore
Restores configuration settings to an out-of-band switch from a backup file named configdata,
which must be first uploaded on the switch using FTP. Create the backup file using the Config
Backup command. Use FTP to load the backup file on a switch, and then enter the Config Restore
command.