Filter
Top Products
Server Chassis Features
Intel® Server Chassis SR1450 User Guide 21
Peripheral Devices (Front Features)
The chassis provides locations and hardware for installing hard drives, a floppy drive, CD-ROM
drive, or DVD-ROM drive. The drives must be purchased separately. The following figure shows
the available options.
TP01589
A
B
C
D
A. Front power supply module
B. Slimline floppy drive or DVD-ROM drive or CD-ROM drive
C. Control panel (Local Control Panel shown)
D. Hard drive bays (3)
Figure 6. Optional Peripherals
Hard Disk Drives
There are two options for hard drive support: SCSI hot-swap or SATA hot-swap.
The middle drive bay can be converted to be used as a floppy bay. To use the bay for a floppy
drive, the AXXFLOPHDDTRAY accessory kit must be used.
For instructions on installing hard drives, see “Installing and Removing a Hard Disk Drive”.
✏ NOTES
Drives can consume up to 17 watts of power each. Drives must be specified
to run at a maximum ambient temperature of 45 °C.
The Intel Server Chassis SR1450 does not support all SCSI or Serial ATA
hard drives. See “Additional Information and Software” for an Internet link
to a list of supported hardware.