Filter
Top Products
Hardware Installations and Upgrades
66
8. Connect the following cables to the backplane:
Front panel cable
Power cable
(SCSI backplane only): SCSI Channel A cable. The cable indicates the end that is to be
connected to the backplane.
(SATA backplane only): SATA cable(s).
9. Install the chassis cover. For instructions, see “Installing the Chassis Cover.”
10. Install the hot-swap hard drive(s), if applicable. For instructions, see “Installing a SATA or
SCSI Hot-swap Hard Disk Drive”.
11. (Optional) Install the front bezel. For instructions, see “Installing the Front Bezel.”