Filter
Top Products
Hardware Installations and Upgrades
Intel
®
Server Chassis SR1450 User Guide 27
Removing and Installing the Front Bezel
The front bezels are available as optional accessories for the Server Chassis SR1450. Two front
bezel options are available. One is used for the Standard Control Panel and the other is used with
the Intel
®
Local Control Panel. See the diagrams below to identify your front bezel. Note the
orientation in the figures below – the control panel is at the right. If you are installing a bezel on
your chassis, make sure you position it as shown.
TP01592
Figure 9. Standard Front Bezel
TP01593
Figure 10. Intel
®
Local Control Panel Front Bezel
Removing the Front Bezel
Use the steps below if your system includes either the standard front bezel or the front bezel for the
Intel Local Control Panel.
1. Unlock the bezel.
2. Disconnect any cables attached to the front of the control panel.
3. Pull the bezel out from the chassis.
TP01594
Figure 11. Removing the Front Bezel