Server Chassis Features
22
Floppy / CD-ROM / DVD-ROM Slimline Carriers
The slimline drive carriers can be used with one slimline floppy, CD-ROM or
DVD-ROM drive. There are two carriers that ship with the chassis; one carrier is for a CD-ROM or
DVD-ROM, and the other is for a slimline floppy. Unless the optional kit to convert a hard drive
bay to a floppy drive bay is used, you cannot install both a CD-ROM / DVD-ROM drive and a
floppy drive.
The floppy drive / CD-ROM / DVD-ROM carriers can be inserted or removed only when
system power is turned off; drives in the slimline carriers are NOT hot swappable. For installation
instructions on installing a floppy drive see “Installing or Removing a Floppy Drive”. For
installation instructions on installing a CD-ROM drive or DVD-ROM drive, see “Installing or
Removing a CD-ROM or DVD-ROM Drive”.
✏ NOTE
The Intel Server Chassis SR1450 does not support all slimline floppy, CD-
ROM or DVD-ROM hard drives. See “Additional Information and Software”
for an Internet link to a list of supported hardware. Intel provides accessory
kits for these drives.
Advanced Management Options
Intel
®
Management Module
Two versions of the Intel
®
Management Module are available to provide additional server
management features.
The Intel Management Module - Professional Edition contains a hardware mezzanine card that
plugs into the server board.
The Intel Management Module - Advanced Edition includes a hardware mezzanine card, a
10/100 Mb NIC mezzanine card, and cables.
For installation instructions on installing either Intel Management Module, see the instructions
provided with the management module and the SE7520JR2 Quick Start User’s Guide.
✏ NOTE
Some server boards may not support the Intel
®
Management Module. See
your server board documentation to determine if this feature is compatible
with your server board.