Filter
Top Products
Hardware Installations and Upgrades
Intel
®
Server Chassis SR1450 User Guide 25
Removing and Installing the Chassis Cover
Removing the Chassis Cover
The Server Chassis SR1450 must be operated with the top cover in place to ensure proper cooling.
You will need to remove the top cover to add or replace components inside of the platform. Before
removing the top cover, power down the server and unplug all peripheral devices and the AC power
cable(s). None of the components accessible through the top cover are hot-swappable.
✏ NOTE
A nonskid surface or a stop behind the chassis may be needed to prevent the
chassis from sliding on your work surface.
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information.”
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the shipping screw (if installed).
5. While holding in the blue button at the top of the chassis in (see letter “A”), slide the top cover
back until it stops (See letter “B”).
6. Lift the cover upward to remove it.
TP01590
A
B
Figure 7. Removing the Chassis Cover