Filter
Top Products
DLA-G150CLU
DLA-G150CLE
1-55
No.51931
28
Connecting to Various Devices
Connecting to Computer Devices
Before connection, be sure to turn off both the projector and computer devices.
• Read thoroughly the manual that comes with each device.
■ Connection to an IBM PC or IBM-compatible computer
• Use the supplied personal computer connection cable. Also, prepare cables required for connecting the devices
connected.
Y
P
B
/B-Y
P
R
/R-Y
IN
R
G
B
H
IN
V
POWER
• Desktop type
To PC 1
Personal Computer
connection cable (supplied)
To monitor
connector
To B
To R
To G
• Notebook type
* There are some notebook types which
do not allow the computer’s LCD to work
if an external display is connected. With
such a notebook computer, the LCD
display and external display output
need to be switched.
• RGB output devices
• Desktop type
To monitor connector
Separate cable (separately available)
To PC 2
To H/Cs
To V
Laser video disc
player, etc.
To G
To R
To H/Cs
To V
To PC 2
To PC 2
To PC 1
To PC OUT
Cable
supplied
with the
display (or
separately
available)
(D-sub 3-
row 15-pin)
* When a display monitor is connected to
the PC OUT terminal, you can view the
video from the computer on the monitor.
Display monitor
To B
27
Connecting to Various Devices
ENGLISHDEUTSHFRANÇAISITALIANOESPAÑOL
Connecting to Devices which Control the Projector
Before connection, be sure to turn off both the projector and devices to be connected.
• Read thoroughly the manual that comes with each device to be connected.
• By connecting a computer to the RS-232C terminal, you can control the projector. Also, you can make an infrared remote
sensor extension unit and connect it to the REMOTE terminal of the projector.
* Obtain connection cables as required. Use a reverse connection cable.
* For details, refer to “RS-232C external control” on page 74.
* For further details, consult your dealer or an authorized service center.
Note
• When connecting the cable to the REMOTE terminal, refer to “How to attach the ferrite core” on page 29.
Y
P
B
/B-Y
P
R
/R-Y
IN
REMOTE
Y/C
VIDEO
R
G
B
H
IN OUT
V
• Desktop type
To RS-232C connector
To RS-232C connector
RS-232C reverse
connection cable
(separately available)
To RS-232C connector
• Note type
To REMOTE terminal
TO CONTROL
Infrared remote sensor
extension unit
(Needs to be made)
* By directly connecting the OUT terminal
to the second DLA-G150CLE IN
terminal, a number of DLA-G150CLE
units can be controlled by a single
computer.
*