Filter
Top Products
KODAK 1200i WIDE-FORMAT PRINTING SYSTEM
Technical Training Guide 16
NOTE 2: When new media is loaded (or changed) the unique user setting
assigned must be chosen, select
Setup Menu – User Setup Menu – Select
User.
Select the user
number (1 through 8) that
was assigned for a
particular media type.
Select Ok.
Example Assignments:
User 1: Photo Satin, 180 g
User 2: Premium Backlit, 7 mil
User 3: PP Gls, 8 mil
User 4: Rapid Dry Gls, 190 g
User 5: Photo Gls, 160 g
User 6: Water Res Vinyl
NOTE 3: If the printer is powered off and on, User Setting 1 is
automatically initialized as a default operational setting. Refer to NOTE 2
above to “set” the proper calibration value for the media type loaded. If
the incorrect user setting is used then banding in printed output may
result due to the incorrect paper feed value being utilized. Media Feed
Adjust controls are better optimized and controlled from the Kodak 1200i
software suite.
D. Perform the other 3
calibrations as normal (Color
Deadband, Color Calibration
Horizontal, and Color Calibration
Vertical):
a) Color Db. Select Utility
Menu – Calibration Menu – Color Db Menu – Color Db
Test.
Choose best group of aligned bars for each color. Perform whenever a new
cartridge is installed.