Filter
Top Products
KODAK 1200i WIDE-FORMAT PRINTING SYSTEM
Technical Training Guide 17
b) Color Cal Horizontal. Select
Utility Menu – Calibration Menu – Color Calib Menu -
Horiz. Calib Test.
Choose best group
of aligned bars for each set of colors.
Perform whenever a cartridge is
removed.
c) Color Cal Vertical. Select
Utility Menu
– Calibration Menu – Color Calib
Menu - Vert. Calib Test.
Choose best
group of aligned bars for each set of
colors. Perform whenever a
cartridge is removed or if the feed
adjust value is adjusted.
E. Activate the Internal Test Print. Select
Utility Menu – Service Menu – Test Print. This
will help verify the printer
calibrations are correct.
Inspect the vertical and
horizontal alignment between
all colors in the upper two
sections of the test print. If
vertical or horizontal
alignment is not achieved
then repeat step D.
Step 12: Best Quality Mode
To obtain the highest or optimum print quality mode from the printer place the print pass mode to 16.
To set the print-pass mode. Print pass mode will impact image output quality – refer to the
guidelines in the chart below:
Print Pass Modes: 2, 3, 4, 6, 8, 10, 12, 16
High speed print modes shown in BLACK
Default print mode shown in RED
Quality print modes shown in BLUE