Filter
Top Products
KODAK 1200i WIDE-FORMAT PRINTING SYSTEM
Technical Training Guide 33
R
R
o
o
u
u
t
t
i
i
n
n
e
e
M
M
a
a
i
i
n
n
t
t
e
e
n
n
a
a
n
n
c
c
e
e
IMPORTANT: It is suggested to perform a weekly cleaning action on the printer (i.e.
every Monday morning for 20 minutes) instead of attempting to remember the user
guide cleaning intervals.
A. Clean the following assemblies:
1. Encoder Strip (lint-free swabs dampened with Windex® or a mild dish soap and
water solution). Thoroughly clean the top and bottom surfaces of the entire length
of the encoder strip (including the area near the service station; access cartridges
to move carriage out). Repeat procedure with new swabs until no ink residues are
observed on swab surfaces.
NOTE: Windex solution should be mainly used on printers running pigment inks.
2. Service Station (lint-free towel/lint-free swab dampened with a mild dish soap &
water solution). Gently clean service station seals & wipers; ensure the outside
edges of the wipers are thoroughly cleaned.
CAUTION: do not remove the service station to clean (only Authorized Service
Providers should remove the service station when necessary).
3. Slide Shaft (lint-free towel dampened with Windex solution or isopropyl alcohol).
Thoroughly clean the entire length of the slide shaft, including the portion near the
service station zone.
NOTE: do not apply solutions directly on the
carriage bushings; allow shaft to dry before
moving carriage assembly.