Filter
Top Products
Troubleshooting 9-17
Troubleshooting
Clearing a Wedged Staple
In-Bin Stapler (Code J75)
1 Holding the sorter handle, gently
slide sorter to the left, away from
the copier main body.
2 Lift handle of the stapler unit.
3 Then open the cover of the
driving portion of the stapler unit
as shown.
4 Remove wedged staple(s) from
driving portion, making sure no
used (bent) staples remain.
5 If any staples have fallen inside
driving portion cover or between
the driving portion and forming
plate, carefully remove them
using a tool with a sharp edge.
6 Remove the sheet of staples, if
any, that remains in the stapler,
removing any used (bent)
staples and sliding unused
staples back into the staple
cartridge.
7 Firmly close driving portion
cover, until it clicks.
8 Holding staple unit handle, return
it to its original position.
9 Close sorter cover and slide
sorter to its original position.
10 Test stapling two or three times
using the manual staple mode.