8-14 Maintenance and Supplies
Maintenance and Supplies
Moving the Copier
Before moving the copier using the instructions below, contact your
Konica service representative.
1 Turn the four handles located
on both sides of copier until the
screw on the handle is at the
top.
2 Then withdraw the handles.
3 Turn the extended handles until
screw is located at the bottom.
Withdraw handles completely.
4 To lock the handles for lifting,
turn them until the screw is in
the top position, making sure
that the pin at the end of the
handle is also at the top. Be
sure to extend all four handles
before lifting the copier.
5 Carefully lift the copier using
the extended handles and
move it to another location.
6 Return the carrying handles to
their original positions by
reversing steps 1~4.