Filter
Top Products
9-8 Troubleshooting
Troubleshooting
Clearing Mishandled Paper (continued)
Codes J31 and J16
CAUTION
To avoid electric shock, do not touch the high voltage area
indicated by a caution label inside the main body.
1 Press release buttons on left and right sides of
copier and open copier front door. Then, push
down on toner box cover and raise the release
lever to open upper part of main body.
2 Open right side cover of copier and remove
mishandled paper from inside main body. Then,
return the cover to its original position.
3 Push down the toner box cover to close the upper
part of the main body.
NOTE: If J31 is indicated and the power is switched off
without mishandled paper being removed, J16 will be
displayed when power is switched on.
4 When using the bypass:
Remove mishandled paper from the bypass tray
opening.