Basic Copying 5-13
Basic Copying
Lens Modes (continued)
Special Ratio Table
Use the Special Ratio Table below to determine the magnification ratios
for non-standard paper sizes.
1 Locate original width on horizontal axis. Then locate copy width on vertical axis.
2 Find the point (ratio) on the table where the two values meet.
3 Locate original length on horizontal axis. Then locate copy length on vertical axis.
4 Find the point (ratio) on the table where the two values meet.
5 Enter the appropriate ratio, using Preset or Zoom modes. Use the smaller ratio for
reduction. Use the larger ratio for enlargement.
Ratios must fall within the 0.50~2.00 range.