5-18 Basic Copying
Basic Copying
Using the Sorter (continued)
Staple-Sort Modes for ST-104
CAUTION
To avoid injury when using the stapling sorter, do not insert your
fingers around staple unit.
Automatic In-Bin Stapling
1 Place originals face down on
RADF/ADF, inserting the edge
to be stapled first as shown.
2 Press
SORTER until the Staple
and Sort indicators light.
3
Enter print quantity (maximum 10).
4 Press START PRINT. Stapling
will be performed automatically
when copying is completed.
Manual In-Bin Stapling
1 Place originals on RADF/ADF
or platen glass, as shown.
NOTE: Copied sets made beforehand can also be stapled by inserting a set in the
first bin with side to be stapled at front right. When the manual staple button on the
sorter lights green, press the button. To clear a wedged staple, see page 9-17.
2 Press SORTER to select Sort.
3 Press
START PRINT.
4 When copying is completed,
press manual staple button on
the sorter to staple copies.
5
Remove stapled copies from bins
.