Filter
Top Products
Special Copying 7-9
Special Copying
OHP Interleave
Use OHP Interleave to copy and insert one OHP film transparency in
addition to each blank sheet.
OHP/COPY PAPER: Must be the same size and orientation
COPY PAPER SOURCE: Tray 1, 2, 3, or 4
OHP SHEET SOURCE: Bypass tray only
MAXIMUM PRINT QUANTITY: 1
INCOMPATIBLE: Sorter, Book Copy, Mixed Size Original
1 Load 8.5”x11” paper in tray.
2 Open bypass and insert one
OHP. Adjust paper guides.
3 Place original FACE DOWN on
platen glass or RADF/ADF.
4 Press OHP INTERLEAVE until
the
OHP indicator lights.
5 Press
START PRINT.
A blank regular sheet and a
copied OHP sheet will be
produce for each original.
6 Press
AUTO to release OHP
Interleave mode.
NOTES:
1 The copier is initially set to insert blank paper between films (blank interleave),
however, it can be set to insert copied sheet (copy interleave) by service.
2 Do not place OHP film transparencies in any tray other than the bypass.