Filter
Top Products
Basic Copying 5-11
Basic Copying
Lens Modes (continued)
Programming a User Preset Ratio
For convenience, program a frequently-used ratio that is not available
as a factory preset ratio. This ratio can be set and changed by the user
as needed.
USER PRESET RATIO: Programmable from 0.50~2.00 in 1% increments
1 While pressing [P], press LENS
MODE
. The User Preset
indicator light will flash.
NOTE: The User Preset ratio will remain stored until it is overwritten.
2 Use the Keypad to enter a
three-digit ratio (0.50~2.00).
3 If necessary, press
STOP/
CLEAR
to restore the original
ratio or to clear a mis-entry.
4 Press
[P] to store the new ratio.