Filter
Top Products
Setting up network printing
3
C451 3-41
2 Touch [Network Settings], then [Bonjour Setting].
3 Specify settings for the following. After specifying the settings, touch
[OK].
– Bonjour Setting: Select [ON].
– Bonjour Name: Specify the Bonjour name that is to appear as the
connected device name (up to 63 characters).
4 To apply the settings, restart this machine (turn the main power off,
then on again).
2
Reminder
When turning the power off, then on again, wait at least 10 seconds be-
fore turning the power on again; otherwise, this machine may not function
properly.
Setting the Macintosh computer
Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.
2
Note
For network settings, consult the network administrator.
For the printer driver installation procedure, refer to “Installing the printer
driver” on page 2-1.
Since Bonjour (a Mac OS X 10.4 function) is always enabled, it is not re-
quired to change the settings.
Bonjour/Rendezvous is a Mac OS X function. For Mac OS 9.2, connect
using AppleTalk.