Filter
Top Products
Setting up network printing
3
C451 3-7
3.3 Accessing PageScope Web Connection
Setting the IP address for this machine enables you to access PageScope
Web Connection.
With PageScope Web Connection, you can change the network settings of
this machine from a computer.
Use your Web browser to directly access PageScope Web Connection.
1 Start up the Web browser.
2 In the “Address” bar, enter the IP address for this machine as shown
below, and then press the [Enter] key.
– http://<IP_address_for_this_machine>/
Example: If the IP address for this machine is 192.168.1.20
http://192.168.1.20/
– If IPv6 is enabled and a Web browser other than Internet Explorer
is used, enter the IPv6 address enclosed in brackets to access Pa-
geScope Web Connection.
http://[IPv6_address_for_this_machine]/
Example: If the IPv6 address for this machine is
fe80::220:6bff:fe10:2f16
http://[fe80::220:6bff:fe10:2f16]/
– If IPv6 is enabled and Internet Explorer is used, edit the hosts file to
note “fe80::220:6bff:fe10:2f16IPv6 IPv6_MFP_1” and specify the
URL according to the domain name.
The initial page of PageScope Web Connection appears.
For further details on PageScope Web Connection, refer to the User’s Guide
[Page Scope Web Connection Operations].
2
Note
If the user authentication function is enabled, you must enter a user name
and password.