Filter
Top Products
Setting up network printing
3
C451 3-8
3.4 SMB printing
You can use SMB printing (Windows printing) to print directly over the Micro-
soft network from computers running Windows.
Operations on this machine
Set the IP address for this machine. For the setting procedure, refer to “Set-
ting the IP address for this machine” on page 3-4.
Next, specify the SMB print settings for this machine as described below.
2
Note
The settings can also be specified from PageScope Web Connection.
1 Press the [Utility/Counter] key in this machine’s control panel, touch
[Administrator Settings], and then enter the administrator password.
– The administrator password is required to enter Administrator
mode. Ask the administrator of this machine for the administrator
password.
2 Touch [Network Settings], [SMB Settings], then [Print Settings].
3 Touch [ON].
4 Specify settings for the following. After specifying the settings, touch
[OK].
– NetBIOS Name: Specify the NetBIOS name (up to 15 characters).
– Print Service Name: Specify the printing service name (up to 12
characters).
– Workgroup: Specify the work group name (up to 15 characters).