Filter
Top Products
24
3 Basic usage
3.5.1 Entering an ID and switching between IDs
─
Entering an ID
─
This function is enabled while the connection conguration is in “Stand-alone” or “Network connection.”
Enter a new ID.
Numbers 0 through 9 and the hyphen (“
─
”) may be used for ID.
You may enter an ID directly with the keypad on the screen or read it through a designated card reader
(optional accessory) or bar code reader (optional accessory).
Procedure 1: Directly entering an ID
1
Press the “Input ID button”.
2
The current ID appears in the ID eld. Check that all digits in the eld are highlighted or delete the
current ID using the BS/Del key; then, use the keypad and enter a new ID. Check that the new ID
is displayed in the ID eld and press “OK button”.
Procedure 2: Reading the ID through a card reader/ bar code reader
1
Press the “Input ID button”.
2
Read the ID through a card reader/ bar code reader.
3
Check the new ID is displayed in the ID eld and press “OK button”.
1
3
2
¿
The last ID entered will be the Save/ View ID of the instrument. If you want to save or view images
under a different ID, follow the procedures in “Switching to another ID” and switch to the ID you
want to use.
¿
Connect a card reader or bar code reader to the instrument before pressing the “Input ID button”.
¿
A card reader or bar code reader must be congured according to its usage environment. If you
are to use a card reader or bar code reader, contact Kowa or your Kowa dealer in advance.