Filter
Top Products
43
5 Setting
5.4 Advanced functions
5.4.1 Internal xation target
In this tab, you may congure the internal xation target settings regarding “Peripheral”.
You may set the lighting sequence of the xation targets to be lit and whether the sequence for the right
eye should be mirrored for the left eye.
─
Setting the photographing sequence
─
The lighting sequence is specied by setting the parts
to be photographed in the right eye.
A: Current sequence in the right eye
B: Current sequence in the left eye
C: Numerical pad for entering a new sequence
D: Mirror button
The numbers shown in “C: Numerical pad for enter-
ing a new sequence” signifies the parts to be pho-
tographed. Press the numbers in the sequence you
want to register a new photographing sequence. You
may enter any number of digits up to nine. When you
have entered the sequence, press “OK”. The new se-
quences will be reected in A and B.
─
Setting the mirror function
─
When the “mirror button (D)” is pressed, the sequence entered for the left eye will be mirrored for the
right eye photography.
When the “mirror button (D)” is not pressed, exactly the same sequence entered for the left eye will be
copied for the right eye photography.
5.4.2 Customize button
“Customize buttons” allow you to easily switch to a
preset combination of camera sensitivity, aperture
size, and reference ash intensity.
In this menu, you may specify a separate set of set-
tings for each customize button.
Press a button number for which you want to set and
press the items you want to specify. If the button
looks “pressed down”, it is selected.
Press “APPLY button” or “OK button” to store the set-
tings in memory.
Main Capture
Custom FA Filter FAF ObserveBlue/BrownInt Fix
Viewer Extension Maintenance
CANCEL
APPLY
OK
Present order(Right eye)
Select the order for the right(R).
(Left eye)
SetOFF
3
1
4
79
8
56
2
3
1
4
79
8
56
2
ResetMirror Setting
A D CB
Main Capture
Custom
Custom1 Custom2 Custom3
FA Filter FAF ObserveBlue/BrownInt Fix
Viewer Extension Maintenance
CANCEL
APPLY
OK
‘Large’ setting is enable when the capture mode is FA and FAF.
”Large” setting is the optical system become the brightness of hal f
apperture (about 1.5 times).
Sensitivity
x1 x1
Standard
Large
x2 x1/2
x4 x1/4
Flash Intensity Iris