Filter
Top Products
25
3 Basic usage
─
Switching to another ID
─
This function is enabled while the connection conguration is “Stand-alone.”
You may switch from the current ID to an existing ID under which you want to save or view.
Procedure
1
Press the “Input ID button” to go to the ID screen.
2
Select an ID from the ID list shown in the ** section of the screen. The selected ID becomes high-
lighted.
3
Press “OK button”.
When more than 10 IDs are registered, use the list switching buttons to change IDs to view.
ID :
ID
LastVisited
Today
N0 ID
-
7 8 9
4 5 6
1 2 3
0
BS Del
CANCEL
OK
3
2
3.5.2 Single image display
This function is enabled while the connection conguration is “Stand-alone.”
You may view the images saved under an ID one at a time.
This function is enabled immediately after you go to the viewer mode. The most recent image saved un-
der the selected ID is displayed.
Use the arrows on the LCD monitor to switch images; “VIEW button” for the next image and “REVIEW
button” for the previous image.
When you press “VIEW button” while the most current image is displayed, the oldest image appears.
When you press “REVIEW button” while the oldest image is displayed, the most current image appears.
The total number of images saved under the ID and the photography sequence number of the image dis-
played are indicated on the upper left of the image.