Filter
Top Products
39
5.1 Main
5.1.1 Monitor brightness
In this tab, you may adjust the brightness of the LCD
monitor,from level 1 through 10 with an increment of
one.
5.1.2 Date
In this tab, you may set the date format and delimiter as well as adjust the date and time.
Main
LCD Bright
Capture
Date Power Saving Sound System
Viewer Extension Maintenance
CANCEL
APPLY
OK
Set the display format and delimiter.
Display Format
Delimiter
YYYYMMDD
/ (Slash)
test
datetime setting
-
(Hyphen)MMDDYYYY
DDMMYYYY
Main
LCD Bright
Capture
Date Power Saving Sound System
Viewer Extension Maintenance
CANCEL
APPLY
OK
Set the display format and delimiter.
Display Format
Delimiter
YYYYMMDD
/ (Slash)
test
datetime setting
-
(Hyphen)MMDDYYYY
DDMMYYYY
CANCEL
APPLY
OK
Date 2011 5 27
Time
/ /
11 4 28: :
Select “YY(Year)MM(Month)DD(Day)” as the format.
You may select a slash or a hyphen as the delimiter
to separate year, month, and day.
When you press “Date button”, the setting dialog box
appears. When you press the “Change the setting
button”, control buttons appear next to each eld. Use
the control buttons to set the date and time.
5.1.3. Power saving mode
In this tab, you may configure the settings for the
power saving mode.
ON: When this instrument is not operated for ap-
proximately 10 minutes, it will resume the power
saving mode (LCD backlight is turned off; halogen
lamp, panel LED, and other lamps are turned off, and
charging function is suspended).
OFF: The instrument will not resume the power sav-
ing mode.
Main
LCD Bright
Capture
Date Power Saving Sound System
Viewer Extension Maintenance
CANCEL
APPLY
OK
Adiust the moniter brightness.
5
Main
LCD Bright
Capture
Date Power Saving Sound System
Viewer Extension Maintenance
CANCEL
APPLY
OK
Set the display format and delimiter.
Display Format
Delimiter
YYYYMMDD
/ (Slash)
test
datetime setting
-
(Hyphen)MMDDYYYY
DDMMYYYY
CANCEL
APPLY
OK
Date 2011 5 27
Time
Set
/ /
11 4 28: :
Main
LCD Bright
Capture
Date Power Saving Sound System
Viewer Extension Maintenance
CANCEL
APPLY
OK
Set power saving mode.
The Setting is applied when you pushed Apply or OK button.
OFF
5 Setting