Filter
Top Products
Review banner
printing checklist
• Use only the number of sheets needed for the banner.
• Select the following settings to enable the printer to feed paper continuously without
jamming:
1 With a document open, click File Print.
2 Click Properties, Preferences, Options, or Setup.
3 Select the Paper Setup tab.
4 From the Paper Size area, select Banner.
5 Select Letter Banner or A4 Banner as the paper size.
6 Select Portrait or Landscape.
7 Click OK.
8 Click OK or Print.
Memory card troubleshooting
• “Memory card cannot be inserted” on page 114
• “Nothing happens when memory card is inserted” on page 114
Memory card cannot be inserted
Check memory card type Make sure that the type of memory card you are using can be used in the printer. For
more information, see “Inserting a memory card” on page 55.
Check memory card
placement
See “Inserting a memory card” on page 55 to determine which slot accommodates your
memory card and to see instructions on how to insert it.
Nothing happens when memory card is inserted
Check memory card
placement
See “Inserting a memory card” on page 55 to determine which slot accommodates your
memory card and to see instructions on how to insert it.
Check memory card type Make sure that the type of memory card you are using can be used in the printer. See
“Inserting a memory card” on page 55.
Memory card may be
damaged
Check that there is no obvious damage to the memory card.
A digital camera may be
connected
Disconnect the PictBridge-enabled digital camera from the printer.
USB cable may not be
connected
1 Check the USB cable for any obvious damage.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the USB symbol
.
Troubleshooting
114