Filter
Top Products
118
Deficient printer memory
What this light sequence means:
The printer lacks the memory needed to enable Resource Save.
This message usually indicates too much memory is allocated for
one or more of the printer link buffers. Resource Save is disabled
when this light sequence occurs.
What you can do:
• Press and release Continue to disable Resource Save and
continue printing.
• To enable Resource Save after you get this message:
– Make sure the link buffers in the Local Printer Setup Utility are
set to Auto, and then exit the menus to activate the link buffer
changes.
– When the Ready message is displayed, enable Resource
Save in the Local Printer Setup Utility.
Note: See Using the Local Printer Setup Utility for more
information.
• Install additional memory. Refer to the Setup Guide for more
information.
Insufficient defrag memory
What this light sequence means:
The printer cannot defragment flash memory, because the printer
memory used to store undeleted flash resources is full.
What you can do:
• Press and release Continue to clear the message.
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory. Refer to the Setup Guide for
more information.
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.