Filter
Top Products
7-2
3. Remove the KBD Plate.
4. Lift the far side of the Keyboard and slide it to backward,
and then turn the Keyboard over frontward.
5. Remove the three Screws <C>.
6. Remove the KBD Connector Cover.
7. Disconnect the Cable from Connector (CN18).
8. Remove the Keyboard.
9. Remove the TP Tape.
10. Disconnect the Cable from Connector (CN800).
11. Remove the Touch Pad and Click Button Plate.
Screws <B>:DRSB2+5FKL
Screws <C>:DFHE5025XA
7.1.4. Removing the Speaker Angle and
DIMM Lid
1. Remove the four Screws <D>.
2. Disconnect the Cable from Connector (CN37).
3. Remove the DIMM Lid.
4. Remove the two Screws <E>.
5. Remove the Speaker Angle.
Screws <D>: DRQT2+D2FKL
Screws <E>: DRHM5025YA
7.1.5. Removing the Rear Cabinet
1. Remove the thirteen Screws <F>.
2. Open the LID Rubbers.
3. Remove the Rear Cabinet.
Screws <F>:DRHM0061ZA
1
2
Keyboard
<C>
KBD
Connector
Cover
Keyboard
Keyboard
FPC
Connector
(CN18)
Connector
(CN800)
TP Tape
Touch Pad
Click Button
Plate
<D>
DIMM LID Sheet
DIMM Lid
Speaker Unit
Speaker
Waterproof
Sheet
Speaker Washer
Speaker Angle
Connector (CN37)
Speaker Cable
Tube
<E>
<D>
<D>
<E>
<D>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>