Filter
Top Products
7-21
! Putting of the PAD Insulation Sheet
! Assembly of TOP CASE ASSY
Don’t overflow.
Front side
Right side
0~0.5mm
Core side
0~0.5mm
Core side
PAD Card Insulation Sheet
TOP Case Assy
TP Bottom Tape
Click Button Sheet
Kensington Lock Plate
Tape
HDD Side Spacer
Detail of "A"
Hook on the protrusions of the boss and the Power Switch.
Attach here.
(0 ~ 0.3mm)
After attaching it,
connect to the Connector.
LED PCB
Avoid running over the side.
Apply the load to attach.
30 to 40N (3.0 to 4.0Kgf)
Remove the Release
Paper and attach it.
Safety Working
Check a lock after the insertion
Fit it to the pin
and attach it.
0~0.5mm
0~0.5mm
0~0.5mm
PAD PCB
After connecting the FFC
Details of cable arrangement
Keep the 1 mm space between
the Top Case and the rib.
Attach to the indent portions
for the USB.
A
Check a lock after the insertion
Kensington Plate
0~0.5mm
0~0.5mm
Kensington Plate
Remove the Release Paper
and attach it to the Top Case.
Gasket
Gasket
PCMCIA Cushion
Screw
SW Spring
Touch PAD
0~0.5mm
0~0.5mm
0~0.5mm
0~0.5mm
0~0.5mm