Filter
Top Products
7-14
7.2.5. Assembling the Anntena Cover, the Tablet Latch Cover and the LCD Rear Case
1. Fix the LCD Rear Case using the 10 Screws <X> and the
2 Screws <W>.
2. Attach the Antenna Covers and the Tablet Latch Cover to
the Display Unit.
3. Tighten the 8 Screws <V> on the back of the Display Unit.
4. Turn the Display Unit over, and tighten the 8 Screws. <V>
Screws <V> : DRQT26+E5FKL
Screws <W> : DXYN3+J10FNL
Screws <X> : DXYN2+J6FNL
! Assembly of LCD Front Case
<X>
<X>
<X>
<X>
<X>
<W>
<W>
<X>
<X>
<X>
<X>
<X>
<V>
<V>
<V>
<V>
<V>
<V>
<V>
<V>
Antenna Cover
Tablet Latch Cover
LCD Rear Case
Antenna Cover
<V>
<V>
<V>
<V>
<V>
<V>
<V>
<V>
LCD Front Assy
Position of pasting TS Tape.
Be free of overhang..
Be free of overhang.
Place this to the ribs.
Magnet Assy
Note for attachment
Ensure it does not come over the display part.
Don’t get into a LCD indication range.
Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).
0~0.5mm
0~0.5mm
0~0.5mm
0~1mm
–1mm
(Both on the top and the side)
Be free of overhang..
0~0.5mm
TS Tape
Magnet Tape
Magnet