Filter
Top Products
7-29
7.2.16. Setting the Speaker and Dimm Lit
1. Fix the Speaker Angle to the DIMM Lit using the two
Screws <E>.
2. Connect the Speaker Cable to the Connector (CN37) of
the Main PCB.
3. Fix the DIMM Lit using the four Screws<D>. No1 to No4
Screws<D>:DRQT2+D2FKL
Screws<E>:DRHM5025YA
! Cautions for Setting the DIMM Lit
<D>:
No4
DIMM LID Sheet
DIMM Lid
Speaker Unit
Speaker
Waterproof
Sheet
Speaker Washer
Speaker Angle
Connector (CN37)
Speaker Cable
Tube
<E>
<D>:
No2
<D>:No1
<E>
<D>:No3
Confirm the direction
of the Connector
when connecting.
Avoid catching
the Cable.
DIMM Lid
When removing the Bottom Case Assy,
be sure to remove the DIMM Lid Assy.
Safety Working
Allowable
right/left
displacement:
max. 1 mm
DIMM Lid Assy
DIMM Thermal Rubber