Filter
Top Products
7-30
7.2.17. Setting the Touch Pad and the Keyboard
1. Connect the Cable to the Connector (CN800), and attach
the Touch Pad to the computer.
2. Set the Click Button Plate.
3. Attach the new TP Tape over the Touch Pad.
4. Attach the Palm Rest Ass'y on the computer.
5. Connect the Cable of the Keyboard to the Connector
(CN18) on the Main PCB.
6. Fix the KBD Connector Cover using the three
Screws<C>.
7. Set the Keyboard to the computer.
8. Fix the KBD Plate using the four Screws<B>.
Screws<B>:DRSB2+5FKL
Screws<C>:DFHE5025XA
Connector
(CN800)
TP Tape
Touch Pad
Click Button
Plate
Palm Rest Ass’y
<C>
KBD
Connector
Cover
Keyboard
Connector
(CN18)
1
2
Keyboard
<B>
<B>
<B>
KBD Plate
KBD Plate
<B>