Mitsubishi Electronics R100 Network Card User Manual


 
1. Introduction
Chapter 1 - Introduction
10 R100 Wireless Gateway
Network Topology
The settings that you need to perform will vary depending on the role
that your Wireless Gateway will play.
Network Backbone
No software setting is necessary in the R100 Wireless Gateway.
In this topology, the wireless gateway connects your wired and
wireless devices together to form a local area network (LAN), as shown.
To connect a computer (or other device) to the R100, you need a
network cable (UTP-Cat5) with one end connected to one of the LAN
ports on the back of the R100 and the other to the 10/100 LAN port on
that device. For wireless connections, wireless mobile clients must
comply with the IEEE 802.11b standard.