Filter
Top Products
3. Utilities
54 R100 Wireless Gateway
Chapter 3 - Software Configuration
USB Applications
Click the USB Applications button on the menu to
reveal the submenu. Follow the instructions to set
up the R100 Wireless Gateway. Tips are displayed
when you move your cursor over an item.
FTP Server
FTP Server Mode – The R100
features an embedded FTP server
for USB storage. Before using the
FTP server, ensure that your USB
device fulfills the following
requirements.
• The FTP server only works with supported USB devices. Supported
devices are listed on the Mitsubishi Electric Australia Web site at
http://www.MitsubishiElectric.com.au.
• The R100 gateway supports read/write functions for FAT or FAT32 file
systems and read-only functions for NTFS (NT file system) with
compressed or uncompressed files. Encrypted files are not
supported. If your USB storage device is formatted as a FAT or FAT32
file system, configure the FTP server to work from the first partition
(partition 0).
• Devices with multi-partitions will be detected; however, only super
users and anonymous users can access devices configured with multi-
partitions. Other users can only access the directory /ftp_pub or /
ftp_pvt/username/ in partition 0.
Note: The R100 only supports USB Storage devices which are
recognised as a “Mass Storage Device”. It does not support other
types of USB to IDE devices. Most compatible USB storage devices
are plug and play; you do not have to power off the gateway when
connecting these devices, however, USB external storage cases for
IDE devices require you to restart the gateway after you connect
them.