Filter
Top Products
3. Utilities
74 R100 Wireless Gateway
Chapter 3 - Software Configuration
Firmware Restoration
This utility will automatically search out failed R100 Wireless Gateways
and upload a firmware that you specify. The process takes about 3 to
4 minutes and during this process the PWR, AIR, and WAN LEDs will
remain lit while the LAN LED will flash slowly.
The Firmware Restoration utility is an emergency rescue tool to restore
a R100 which has failed during a previous firmware upload. A failed
firmware upgrade will cause the R100 to enter a failure mode, waiting
for the user to use the Firmware Restoration utility to find and upload
a new firmware. This is not a firmware upgrade utility and cannot be
used on a working R100 Wireless Gateway. Normal firmware upgrades
must be done through the web manager.
Using a Hub
If you have problems uploading a firmware while using a network hub,
try connecting your computer directly to the LAN port of the R100.
Either 10Base-T or 100Base-TX connections will work.