Filter
Top Products
3. Utilities
40 R100 Wireless Gateway
Chapter 3 - Software Configuration
IP Config
Click on the IP Config button on the menu to reveal
the submenu. Follow the instructions to set up the R100
Wireless Gateway. Tips are displayed when you move
your cursor over an item.
WAN & LAN
WAN Connection Type
The R100 Wireless Gateway
supports four connection types to
WAN, including Static IP, PPPoE,
PPTP and Automatic IP. The WAN
setting fields in this page will differ
depending on what kind of
connection type you select.
WAN IP Setting
These three items are editable only
when WAN Connection Type is
set as Static IP or PPTP.
IP Address - This is the IP
address of the Wireless Gateway
as seen on the remote network. If
you leave it blank, the gateway will
get an IP address from the DHCP
Server automatically.
Subnet Mask - This is the Subnet
Mask of the Wireless Gateway as seen on the remote network.
Default Gateway - This is the IP address of the default gateway that
allows for contact between the Wireless Gateway and the remote
network or host.
WAN DNS Settings
You can set the DNS setting when using any WAN Connection Type
(Static IP, PPPoE, or Automatic IP).
Get DNS Server automatically? - Normally this is automatic and
you would answer No to the question about manually assigning DNS.
If you are given instructions from your ISP to enter DNS addresses,
select Yes to manually assign DNS.