Filter
Top Products
3. Utilities
66 R100 Wireless Gateway
Chapter 3 - Software Configuration
First step for setting your wireless
interface is to give it a name, called
the SSID. In addition, if you would
like to protect transmitted data,
please select WEP protection and
assign WEP keys for data
transmission. Your wireless setting
will be applied to all interfaces.
(See next few pages for item
descriptions.)
If you would like to perform other settings, click a button on the
menu to reveal the submenu. Follow the instructions to set up the
R100 Wireless Gateway. Tips are given when you move your cursor
over each item.
AP Mode
After selecting Access Point mode and clicking Apply, select Home,
then click on the Quick Start link to enter the Quick Setup page of
the Access Point mode. Follow the instructions to setup the R100
Wireless Gateway.
Note: The Wireless settings are the same as the settings in the
Wireless Gateway Mode. To learn more about these settings, please
refer to the Wireless Gateway Mode in this user’s manual.
Quick Setup in Access Point Mode
Click Quick Setup to enter the Quick Setup page. Follow the
instructions to set up the R100 Wireless Gateway.
Configure Wireless Interface