Filter
Top Products
3. Utilities
R100 Wireless Gateway 47
Chapter 3 - Software Configuration
NAT Settings
Click the NAT Settings button on the menu to reveal
the submenu. Follow the instructions to set up the R100
Wireless Gateway. Tips are given when you move your
cursor over each item.
Port Trigger
This function allows you to open
certain TCP or UDP ports to
communicate with the computers
connected to the R100. This is
done by defining trigger ports and
incoming ports. When the trigger
port is detected, the inbound
packets to the specified incoming
port numbers are redirected to
your computer.
Enable Port Trigger? - Selecting Yes applies all the rules in the Port
Trigger List to the Wireless Gateway.
Well Known Applications - This selects protocols associated with
certain applications that can be used with Port Trigger.
Trigger Port List
Trigger Port - This field allows you to enter the port or port range of
outgoing packets that will trigger port redirect.
Protocol - This field allows you to select the protocol of outgoing
packets.
Incoming Port - This field allows you to enter the port or port range of
incoming packets that will be redirected to your computer.
Description –This field allows you to record what this rule is used for.