Filter
Top Products
3. Utilities
48 R100 Wireless Gateway
Chapter 3 - Software Configuration
NAT Settings
Click the NAT Settings button on the menu to reveal
the submenu. Follow the instructions to set up the R100
wireless Gateway. Tips are given when you move your
cursor over each item.
Virtual Server
To make services, like WWW,
FTP, provided by a server in your
local network accessible for outside
users, you should specify a local
IP address to the server. Then, add
the IP address and network
protocol type, port number, and
name of the service in the following
list. Based on the list, the gateway
will forward service requests from
outside users to the
corresponding local server.
Enable Virtual Server?– Selecting Yes applies all those rules in Virtual
Server List to the Wireless Gateway.
Well Known Applications - This selects applications or protocols
that can be used with Virtual Server.
Virtual Server List
Local IP – This field stands for the destination IP address that you want
to redirect the matched packet to.
Port Range– This field stands for a port number or a range of ports. If the
destination port of incoming packets matches the port, or is within the port
range, the incoming packets will be redirected to the IP address specified
in Local IP.
Protocol– This defines the protocol used by incoming packets.
Description –This field allows you to record what this rule is used for.