Filter
Top Products
Troubleshooting
88 R100 Wireless Gateway
Problem
I cannot find the R100 Wireless Gateway using the R100 Wireless Gateway
Discovery utility.
Solution
To configure the R100 through a wireless LAN card, your computer
must be in the same subnet of the R100. You cannot find the R100
Wireless Gateway with a subnet different from your computer within
the same gateway. You must change your computer to the same
subnet as the R100s. The factory default subnet of the R100 Wireless
Gateway is 192.168.1.1.
In Windows NT/2000/XP, you must log in with Administrator privi-
leges so that all functions of the R100 Wireless Gateway Manager
can function correctly. If you do not log in as a member of the Admin-
istrator group, you cannot change IP settings but can still run the
Discovery utility if the original IP setting is correct.
Problem
How do I upgrade the firmware on the R100 Wireless Gateway?
Solution
Periodically, a new Flash Code is available for R100 Wireless Gateways
on the Web site at:
http://www.MitsubishiElectric.com.au
Update the R100’s Flash Code using the Firmware Upgrade option
on the System Setup menu of the Web manager.
Appendix -Troubleshooting