Filter
Top Products
3. Utilities
46 R100 Wireless Gateway
Chapter 3 - Software Configuration
DDNS Setting
Dynamic DNS - DDNS allows a user to export a host name to the Internet
through a DDNS service provider. Each time the Wireless Gateway connects
to the Internet and gets an IP address from the ISP, this function will update
your IP address to the DDNS service provider automatically, so that any user
on the Internet can access the R100 or servers behind it through a predefined
name registered at the DDNS service provider.
Enable the DDNS Client? – Select Yes to enable DDNS update, then each
time your IP address to WAN is changed, the information will be updated to
the DDNS service provider automatically.
Server – Currently, clients connecting to DynDNS or TZO are embedded in
the wireless gateway. You can click the Free Trial link behind this field to start
with a free trial account.
User Name or E-Mail Address – Enter your username here to log in to the
Dynamic-DNS service.
Password or DDNS Key – Enter your password here to log in to the Dynamic-
DNS service.
Host Name –This field represents the Host Name you registered with the
Dynamic-DNS service and expect to be seen on the Internet.
Enable wildcard? – This field determines whether an incorrectly entered
domain name is also redirected to your IP address.
Update Manually –This button allows you to update the DDNS database
manually. It is available only when automatic DDNS update has failed. You
can get the current status of the DDNS update from the System Log.
Note: Currently, clients connected to DynDNS or TZO are embedded