Monarch 9820 Printer User Manual


 
10 ips printing is only available using 203 dpi with thermal
direct label supplies in continuous mode. 10 ips is only
available on the 9850 printer.
94x5 emulation is not supported using 300 dpi.
The maximum supply and image length with the optional 300
dpi printhead is 12.0 inches (305 mm).
The recommended print speed using the optional verifier is 6.0
ips.
The 9850 printer can print 203 dpi serial bar codes with
narrow elements of: less than 3 dots at 2.5 ips; 3 dots at 4.0
ips; and 4 dots (or more) at 6.0 ips (or greater).
Contact your Monarch Representative for supply requirements
in high temperature and high humidity environments.
Downloading Methods
Depending on your application, you can download the format and
batch data using one of three methods: sequential method, batch
method, batch quantity zero method.
Sequential Method
Using the sequential method, you send all your format and batch
data at one time. Use this method when your application does
not require operator intervention to input data. All data is sent
down at one time, and the printer then images each field. As
soon as the last field is imaged, your labels begin to print.
Example
{Format}
{Batch Packet}
6-8
Printing