Monarch 9820 Printer User Manual


 
Special Considerations When Using Backfeed
Make a note of the following items:
Be careful when tearing supplies, because the adhesive can
adhere to the printhead or platen roller.
Backfeed affects each label in the on-demand mode or the
first and last label of the batch in continuous mode.
When backfeed is enabled and multiple batches are sent, the
printer may not backfeed between each batch.
Backfeed should only be used when you need to advance
labels to the desired dispense point.
Backfeed does not interfere with the supply, print, or margin
positions you have set.
If the supply inter-label gap is not between .07 inch to .15 inch
(14 to 30 dots), you must adjust the dispense position and
backfeed distance accordingly.
See the following graphic for a representation of the following
adjustments: dispense position, backfeed distance, supply
position, print position, and margin position.
Contact Technical Support if you have problems adjusting where
the format prints on the supply.
2-22
Configuring the Printer