Monarch 9820 Printer User Manual


 
Machine Faults
Errors 700 to 793 occur when there is a problem with the printer.
703 The printer sensed a calibration of different-sized black
marks. Make sure the correct supply is loaded.
704 Printer has not sensed a supply mark within the
specified number of inches or out of supplies.
Check the
supply tracking
supply marks
black mark sensor position
supply roll for binding.
Press CLEAR (ESCAPE/CLEAR) or ENTER
(ENTER/PAUSE), depending on your printer. If the
error continues to appear, change the supply.
750 Printhead is overheated. Turn off the printer to let the
printhead cool. If the error persists, call Technical
Support.
751 Printer did not sense a black mark when expected.
For errors 751-753, Check the
supply tracking
supply marks
black mark sensor position
supply roll for binding.
Press CLEAR (ESCAPE/CLEAR) or ENTER
(ENTER/PAUSE), depending on your printer and try to
continue printing. If the error continues to appear,
change the supply.
752 Printer sensed a mark in the wrong place.
Diagnostics and Errors
8-21