Filter
Top Products
Baseline Bottom of the font.
Cell Width Horizontal number of dots to contain the
widest character.
Cell Height Vertical number of dots to contain the tallest
character.
Nominal Width Average width for lower-case letters.
Nominal Height Average height for lower-case letters.
Inter-Character
Gap
Default spacing between characters in
monospaced fonts.
Printhead Density Displays whether a 203 (0) dpi or 300 (1) dpi
printhead is used.
The scalable font (font 50) is not available for
all printers and it does not display which
printhead (203 dpi or 300 dpi) is used.
Using the Flash Upload Packet
Use the flash upload packet to check the contents of flash
memory.
You can only use this packet on 9403 Version
2.0 (or greater) printers.
Syntax
{header,packet#,action p }
1. header Identifies the packet. Options:
A Check Digit Scheme
F Format
G Graphic
2. packet# Identification number of the packet. Use 0 to upload all
packets.
3. action Enter H to upload flash information.
2-36
Configuring the Printer