Filter
Top Products
T6. column Distance from the left edge of the print
area to the pivot point to find the column
location. Use the previous table for values.
T7. gap Number of dots between characters 203
dpi (or 300 dpi for 9840 and 9850 printer).
Range:
0-99
.
NOTE:
For monospaced fonts, the additional spacing is
added to the existing inter-character gap. This is
also true for proportionally spaced fonts, but
remember that the inter-character gap varies with
character combinations.
Any number other than
0
or the default number affects your
field width. Default spacing:
Standard
3 dots
Reduced
1 dot
Bold
3 dots
OCRA-like
3 dots
CG Triumvirate Bold
varies with each letter
CG Triumvirate
varies with each letter
T8. font Style of font. Options:
1
Standard
10
CG Triumvirate Bold
2
Reduced
11
CG Triumvirate
3
Bold
15
7 pt. CG Triumvirate
4
OCRA-like
16
9 pt. CG Triumvirate
5
HR1
17
11 pt. CG Triumvirate
6
HR2
18
15 pt. CG Triumvirate
50
CG Triumvirate Bold (Scalable)
EFF Swiss Bold (TrueType-only
9840 V6.5+ or 9850 printer)
Or a valid downloaded font selector number.
Fonts
5
and
6
are for numeric data only.
The 9403/9805 support fonts
1
,
2
,
3
,
4
,
5
,
6
,
10
, and
11
.
The scalable font, CG Triumvirate Bold, (font
50
) is only
available with the 9830, 9835, 9840, and 9850 printers. With
the 9840 V6.5+ and 9850 printer, font 50 is EFF Swiss Bold
(TrueType) font.
The CG Triumvirate fonts support only the ANSI and DOS
Code Page (437 and 850) Symbol Sets. See Appendix C for
more information.
Defining Fields
3-5