Filter
Top Products
6-12 usInG f-code features
Polling a document using a subaddress and password
1
Switch to the Fax mode by pressing
<
copy
4
fax
4
scan
>
.
2
Press <Advanced Functions> until “F-Code Polling” appears on the LCD then press
<Enter>.
F-Code Polling
/
/Enter
– or –
Press the “F-Code Polling” soft key.
Enter Sub-Address
_
3
Use the numeric keys to enter the appropriate ITU-T subaddress.
Then press <Enter>.
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
4
Use the numeric keys to enter the ITU-T password.
Then press <Enter>.
If you do not need to enter the ITU-T password, press <Enter> without entering any
number.
Enter Fax Number
_
5
Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
6
Press <Start>.
Your machine dials the number and polling the document from the remote F-code
compatible machine.
To cancel the polling in progress, press <Job Confirm./Fax Cancel> and <Cancel>,
<Cancel>.
To cancel the delayed polling, press <Job Confirm./Fax Cancel>, search the command
number you want to cancel using the cursor key, then press <Cancel>, <Cancel>. (See
also “Reviewing or canceling command,” on page 4-8.)