Filter
Top Products
3-4 autodIaLLer & dIaLLInG optIons
One-touch keys
Adding or editing a one-touch number
Your machine can store up to 40 one-touch numbers using the keys marked 1 to 40.
1
Press <Menu>, <1>, <1>, <1>, then <Enter>. The empty one-touch number will be
shown.
Select One-Touch
01:No Number Stored
2
Press <q> or <p> to select a one-touch number.
You can also select a one-touch key by pressing that key.
3
Press <Enter>.
01:Fax Number
_
4
Use the numeric keys to enter the number exactly as you would enter it if performing
a manual dial. The number can hold up to 40 digits.
To change a dial number, press <t> or <u> to move the cursor and press <Cancel> to
erase the number. Then enter the correct digit.
5
Press <Enter>.
01:Name ;Upper
_
6
Use the numeric keys to name the one-touch key.
The name can hold up to 24 characters.
(Regarding how to enter the characters, see “Entering characters” on page 2-2.)
To change the name, press <t> or <u> to move the cursor, and press <Cancel> to
erase the name. Then re-enter the correct name.
7
Press <Enter> to save the setting.
The next empty one-touch number will be shown.
8
To enter another one-touch number, repeat this procedure from step 2.
To exit the operation and return to standby mode, press <Reset>.
9
Use the one-touch key labels supplied with your machine to label the one-touch keys
for easy reference.
NOTE: To print a list of one-touch numbers, press <Menu>, <5>, <1>, <0>, <7>, <Enter>.